Username:

Password:

Pages: [1]
  Print  
Author Topic: 2 things need help with  (Read 2997 times)
GR142_GenSwat
Registered Site Member
Newbie
*
Offline Offline

Posts: 3


View Profile WWW
« on: April 08, 2003, 02:11:39 am »

ONE on my Il2 sturmovic all is fine and dandy, till i shoot some one down and land... I hit refly nothing but click I hit esc"quit" click I cant refly nor can i leave game....


TWO  when exiting FB I get an error reads as follows

Date 04/08/2003 Time 01:47
IL2FB caused an invalid page fault in
module OPENGL32.DLL at 018f:77250304.
Registers:
EAX=81dc1be0 CS=018f EIP=77250304 EFLGS=00010286
EBX=0b040000 SS=0197 ESP=0a24fc44 EBP=0a24fc70
ECX=0b0627f0 DS=0197 ESI=1deb9480 FS=3e27
EDX=00000000 ES=0197 EDI=00000001 GS=1626
Bytes at CS:EIP:
ff a2 58 03 00 00 8b c0 64 a1 18 00 00 00 8b d0
Stack dump:
0b062804 00008920 0b11df83 00000000 0b11e018 0b040000 00000000 00000001 00000000 0b040000 81dc1c24 0a24fe38 bff6df5f 0b040000 00000001 00000001

 
Logged

 
TX-Deck
BLACK 3
TX-Member
Hero Member
*****
Offline Offline

Posts: 906


View Profile WWW
« Reply #1 on: April 08, 2003, 08:39:29 am »

GenSwat...I saw that refly issue once with IL2, and after reinstalling with the correct patches in the proper order, it was gone.  I'm not sure how it would relate to FB.   Also, just a basic thought... make sure your engines are off when your ready to refly.The error when exiting the game appears to be a video driver issue.  You might double check your video drivers for your particular card and obtain the latest drivers from the manufacturer.   Most cards these days are either Nvidia based or ATI Radeon flavor, and I heard that Nvidia just released a new set that are supposed to give a bump in performance.   Good luck, keep us posted.TX-Deck out.
Logged

TX-Deck out.
LW_Tornado
Former Member
Hero Member
*****
Offline Offline

Posts: 598


View Profile WWW
« Reply #2 on: April 08, 2003, 06:51:59 pm »

Wow, thought i was alone lol, i get an error everytime i close FB as well, not sure  if its the same, getting the drivers now. As for the refly issue , you got me stumped, sorry mate.TX-TornadoBadd Azz Blue 3TX Squadron TO
Logged


TX-EcoDragon
BLACK 1
Administrator
Hero Member
*****
Offline Offline

Posts: 3034


G's Please


View Profile WWW
« Reply #3 on: April 08, 2003, 08:52:21 pm »

There was an error in the conf.ini file that popped up after certain patches were used. . .I seem to remembr that you can just go into the conf.ini file and fix it. lemme take a look at it. . .ok. . try this:look in your conf.ini file for this entry, and verify that Escape=activate.[HotKey gui]Escape=activateThe OpenGL error does look like it might just be fixed by updating video card drivers, or perhaps running in DirectX mode (most people using ATI cards must do this)S!and good luck.Current mount: P-39 Q10Favorite Plane in the sim: BF109-G6A/SFuture Favorite Plane: P-51Characteristic noise during dive as reported by a third party witness: GGGGRRRRRRRBBBBBRRRRAAAAAAAAAAAAAAAAAAAAAAAAWWWWWWWK!!!
Logged

S!

TX-EcoDragon
Black 1
Pages: [1]
  Print  
 
Jump to: